EAAV Performance | Nuestra pasión es tu Performance
034 Motorsport

Dynamic+ B8/B8.5 AUDI S4/S5 & Q5/SQ5 3.0 TFSI

$90.990
-
+
Sólo quedan 0 unidades de este producto

PRODUCT DESCRIPTION:

034Motorsport Performance Software for B8/B8.5 Audi S4/S5/Q5/SQ5 models equipped with the powerful 3.0 TFSI Supercharged V6 engine is flashed directly through your vehicle's OBD-II port. 034Motorsport’s proprietary calibrations for the Simos 8 ECU safely and effectively increase the power output of the 3.0 TFSI engine. The result is a noticeable improvement in acceleration and throttle response, without any sacrifice in driveability or reliability.

034Motorsport's 3.0 TFSI Performance Software was developed entirely in-house on 034Motorsport's Development B8 Audi S4. The calibrations were then refined on multiple enthusiast-owned B8/B8.5 Audi S4/S5 vehicles before release.

CALIFORNIA AIR RESOURCE BOARD AND EPA EXEMPT FILES:

034Motorsport Performance Software with California Air Resource Board (CARB) exempt Stage 1 files are available for on-road use under Executive Order D-850. 034Motorsport CARB exempt files are designed for residents of emissions-controlled environments and on-road use and are included free with the purchase of 034Motorsport Stage 1 Dynamic+ Tuning. 034Motorsport CARB exempt Performance Software offers the same great performance and reliability, now exempted from California Vehicle Code Section 27156 and the Federal Clean Air Act which prohibit modifications that increase motor vehicle emissions.

To receive your CARB Executive Order sticker, please fill out the following Form after you have completed flashing the CARB exempt tuning file to your ECU.

ADVANCED LAUNCH CONTROL

Once again, 034Motorsport has pushed the boundaries of what is possible for the 3.0T Supercharged engines found in many Audi’s through our Dynamic+ tuning! After extensive development and refinement by our world-class tuning team, all existing and future 034Motorsport tuning customers will have access to all Advanced Launch Control programs.

These features allow you to customize your desired launch RPM on the fly via your cruise control stalk, and run the intercooler pumps and engine fans at full speed below 10kph to allow for full cooling during staging prior to drag racing. This provides a large advantage over factory launching protocols as it results in the coolest possible IATs, and allows the driver to adjust their launch settings to be the most optimal for their conditions.

SOFTWARE FEATURES

Dyno Proven Gains
Increased Horsepower & Torque Throughout the Powerband
Acceleration Enhancements
Improved Power Delivery, Acceleration, and Driving Characteristics
Multiple Octane Support
Available in 91 Octane, 93 Octane, and 100 Octane Calibrations
Faster Throttle Response & Improved Precision
Refined Throttle Mapping for Enhanced Throttle Response & Precision
Raised Rev Limit
Raised RPM Limit to 7,200 for Broader Powerband
Speed Limiter Removed
Speed Limiter Removed for Increased Top Speed
Track Tested
Track-Tested Calibrations Ensure Consistent Power Delivery
Port Flashing
Flashed Directly Via the Factory OBD-II Port


034MOTORSPORT 3.0 TFSI SUPERCHARGED SIMOS 8.4 & 8.5 PERFORMANCE SOFTWARE COMPARISON

STAGE
FUEL
MAX HP
MAX TQ
MAX HP GAIN
MAX TQ GAIN
REV LIMITER*
SPEED LIMITER
Stock
91 Oct (AKI)
332 HP
318 TQ
NA
NA
6,500 RPM
150 MPH
Stage 1
91 Oct (AKI)
430 HP
374 TQ
98 HP @ 7,100 RPM
72 TQ @ 7,100 RPM
7,200-7,400 RPM
Stage 1
93 Oct (AKI)
438 HP
374 TQ
106 HP @ 7,100 RPM
78 TQ @ 7,100 RPM
7,200-7,400 RPM
Stage 1
100 Oct (AKI)
444 HP
374 TQ
112 HP @ 7,100 RPM
83 TQ @ 7,100 RPM
7,200-7,400 RPM
Stage 1
104 Oct (AKI)
453 HP
378 TQ
121 HP @ 7,100 RPM
89 TQ @ 7,100 RPM
7,200-7,400 RPM
Stage 2
91 Oct (AKI)
450 HP
387 TQ
118 HP @ 7,100 RPM
87 TQ @ 7,100 RPM
7,200-7,400 RPM
Stage 2
93 Oct (AKI)
455 HP
389 TQ
123 HP @ 7,100 RPM
91 TQ @ 7,100 RPM
7,200-7,400 RPM
Stage 2
100 Oct (AKI)
465 HP
400 TQ
133 HP @ 7,100 RPM
98 TQ @ 7,100 RPM
7,200-7,400 RPM
Stage 2
104 Oct (AKI)
470 HP
406 TQ
138 HP @ 7,100 RPM
102 TQ @ 7,100 RPM
7,200-7,400 RPM
Stage 2+
91 Oct (AKI)
** TBD
** TBD
** TBD
** TBD
7,400-7,600 RPM
Stage 2+
93 Oct (AKI)
** TBD
** TBD
** TBD
** TBD
7,400-7,600 RPM
Stage 2+
100 Oct (AKI)
** TBD
** TBD
** TBD
** TBD
7,400-7,600 RPM
Stage 2+
104 Oct (AKI)
** TBD
** TBD
** TBD
** TBD
7,400-7,600 RPM
Stage 2+
E40 Blend (AKI)
540 HP
491 TQ
208 HP @ 7,100 RPM
174 TQ @4,720 RPM
7,400-7,600 RPM


*If you have an automatic or DSG transmission rev limiter increases in the ECU will not change your maximum shift RPM. To increase the shift points you need performance TCU software as well

**Some octane variants are fully developed but have not yet undergone our dyno data colection process and as such the peak increases and power numbers are not yet listed, but you can expect similar gains to the difference of the octanes we have provided the full data collection and dyno information for.

***All octane ratings are in US standard AKI (RON+MON). Some ROW countries such as the UK use a RON octane rating that differs from US Octane ratings. Please email tuning@034motorsport.com to ensure you are running the correct octane file for your area. Running the incorrect octane file for your fuel can result in irreversible damage.

034MOTORSPORT 3.0 TFSI SUPERCHARGED SIMOS 8.4 & 8.5 PERFORMANCE SOFTWARE STAGE DESCRIPTIONS

STAGE 1

034Motorsport Stage 1 Performance Software for the B8/B8.5 Audi S4/S5/Q5/SQ5 3.0 TFSI is engineered to safely increase horsepower and torque with no hardware modifications required. 034Motorsport's proprietary calibrations increase boost by controlling the supercharger bypass, while optimizing timing and fueling maps to extract additional power from the 3.0 TFSI engine.

Stage 1 Performance Software features a higher redline of 7,200 RPM, resulting in a broader powerband and greater peak horsepower figures than available with the factory 7,000 RPM maximum engine speed. In addition to power improvements, 034Motorsport's engineers spent a significant amount of time refining the throttle mapping in both Dynamic and Comfort modes to provide improved throttle response and allow for more precise throttle modulation. Stage 1 Performance Software also enables left foot braking, which allows for further control of the vehicle when driving on track.

034Motorsport 3.0 TFSI Performance Software is flashed via the factory OBD-II port, and does not require any physical modification of the factory ECU. Stage 1 is available in 91 Octane, 93 Octane, 100 Octane, and 104 Octane files. ALL FILES ARE US (MON+RON) RATING, ROW OCTANE RATINGS MAY DIFFER

STAGE 2

034Motorsport Stage 2 Performance Software for the B8/B8.5 Audi S4/S5/Q5/SQ5 3.0 TFSI is engineered to further increase horsepower and torque output over Stage 1 levels with the addition of 034Motorsport's 3.0 TFSI Supercharger Pulley Upgrade. The Supercharger Pulley Upgrade allows for increased boost pressure from the factory Eaton TVS1320 Supercharger throughout the powerband, while 034Motorsport's proprietary calibrations safely yield additional power from the 3.0 TFSI engine.

Stage 2 Performance Software features a higher redline of 7,200 RPM, resulting in a broader powerband and greater peak horsepower figures than available with the factory 7,000 RPM maximum engine speed. In addition to power improvements, 034Motorsport's engineers spent a significant amount of time refining the throttle mapping in both Dynamic and Comfort modes to provide improved throttle response and allow for more precise throttle modulation. Stage 2 Performance Software also enables left foot braking, which allows for further control of the vehicle when driving on track.

034Motorsport 3.0 TFSI Performance Software is flashed via the factory OBD-II port, and does not require any physical modification of the factory ECU. Stage 2 is available in 91 Octane, 93 Octane, 100 Octane, and 104 Octane files. ALL FILES ARE US (MON+RON) RATING, ROW OCTANE RATINGS MAY DIFFER.

STAGE 2+

034Motorsport Stage 2+ Performance Software for the B8/B8.5 Audi S4/S5/Q5/SQ5 3.0 TFSI is engineered to further increase horsepower and torque output over Stage 2 levels with the addition of 034Motorsport's 179 or 190mm Lower Pulley in addition to our upper pulley. The Supercharger Pulley Upgrade allows for increased boost pressure from the factory Eaton TVS1320 Supercharger throughout the powerband, while 034Motorsport's proprietary calibrations safely yield additional power from the 3.0 TFSI engine.

Stage 2+ Performance Software features a higher redline of 7,400 RPM, resulting in a broader powerband and greater peak horsepower figures than available with the factory 7,000 RPM maximum engine speed. In addition to power improvements, 034Motorsport's engineers spent a significant amount of time refining the throttle mapping in both Dynamic and Comfort modes to provide improved throttle response and allow for more precise throttle modulation. Stage 2+ Performance Software also enables left foot braking, which allows for further control of the vehicle when driving on track.

034Motorsport 3.0 TFSI Performance Software is flashed via the factory OBD-II port, and does not require any physical modification of the factory ECU. Stage 2+ is available in 91 Octane, 93 Octane, 100 Octane, 104, and E40 Octane files. ALL FILES ARE US (MON+RON) RATING, ROW OCTANE RATINGS MAY DIFFER

034MOTORSPORT 3.0 TFSI SUPERCHARGED SIMOS 8.4 & 8.5 PERFORMANCE SOFTWARE DYNO CHARTS


Select Dyno Chart: --- Stage 1 --- 91 Octane --- Stage 1 - 91 Octane - Crank Horsepower & Torque Stage 1 - 91 Octane - Crank Horsepower & Torque Gains Stage 1 - 91 Octane - Wheel Horsepower & Torque --- Stage 1 --- 93 Octane --- Stage 1 - 93 Octane - Crank Horsepower & Torque Stage 1 - 93 Octane - Crank Horsepower & Torque Gains Stage 1 - 93 Octane - Wheel Horsepower & Torque --- Stage 1 --- 100 Octane --- Stage 1 - 100 Octane - Crank Horsepower & Torque Stage 1 - 100 Octane - Crank Horsepower & Torque Gains Stage 1 - 100 Octane - Wheel Horsepower & Torque --- Stage 1 --- 104 Octane --- Stage 1 - 104 Octane - Crank Horsepower & Torque Stage 1 - 104 Octane - Crank Horsepower & Torque Gains Stage 1 - 104 Octane - Wheel Horsepower & Torque --- Stage 2 --- 91 Octane --- Stage 2 - 91 Octane - Crank Horsepower & Torque Stage 2 - 91 Octane - Crank Horsepower & Torque Gains Stage 2 - 91 Octane - Wheel Horsepower & Torque --- Stage 2 --- 93 Octane --- Stage 2 - 93 Octane - Crank Horsepower & Torque Stage 2 - 93 Octane - Crank Horsepower & Torque Gains Stage 2 - 93 Octane - Wheel Horsepower & Torque --- Stage 2 --- 100 Octane --- Stage 2 - 100 Octane - Crank Horsepower & Torque Stage 2 - 100 Octane - Crank Horsepower & Torque Gains Stage 2 - 100 Octane - Wheel Horsepower & Torque --- Stage 2 --- 104 Octane --- Stage 2 - 104 Octane - Crank Horsepower & Torque Stage 2 - 104 Octane - Crank Horsepower & Torque Gains Stage 2 - 104 Octane - Wheel Horsepower & Torque --- Stage 2+ (Dual Pulley) --- E40 --- Stage 2+ (Dual Pulley) - E40 - Crank Horsepower & Torque Stage 2+ (Dual Pulley) - E40 - Crank Horsepower & Torque Gains Stage 2+ (Dual Pulley) - E40 - Wheel Horsepower & Torque

034MOTORSPORT 3.0 TFSI SUPERCHARGED SIMOS 8.4 & 8.5 PERFORMANCE SOFTWARE HARDWARE REQUIREMENTS

STAGE
REQUIRED MODIFICATIONS
RECOMMENDED MODIFICATIONS
Stage 1

  • No hardware required

Stage 2

  • 034Motorsport Supercharger Pulley Upgrade
    or
    034Motorsport 3.0 TFSI Crank Pulley Upgrade
  • 034Motorsport High-Flow Throttle Body Inlet Hose

  • 034Motorsport Res-X Resonator Delete
  • 034Motorsport X34 Carbon Fiber Intake
  • 034Motorsport Supercharger Heat Exchanger
  • 034Motorsport Performance S-Tronic TCU Software
Stage 2+

  • 034Motorsport Supercharger Pulley Upgrade
  • 034Motorsport 3.0 TFSI Crank Pulley Upgrade
  • 034Motorsport X34 Carbon Fiber Intake
  • 034Motorsport Supercharger Heat Exchanger
  • 034Motorsport Performance S-Tronic TCU Software
  • 034Motorsport Upgraded HPFP (Required only for E40)

  • Better tires


034MOTORSPORT DYNAMIC+ END USER FLASHING KIT

034Motorsport's Dynamic+ End User Flashing Kit allows customers to install their 034Motorsport Dynamic+ Performance Software themselves. In addition, End User Flashing allows Dynamic+ Performance Software customers to receive and install software updates and revisions, flash back to stock, or upgrade to the next stage of performance software for their vehicle.

Requirements for End User Flashing:

  • Windows 10 Laptop with Available USB Port
  • Power Supply for Laptop
  • Secure Wired (Or Very Stable WiFi) High-Speed Internet Connection
  • CTEK Trickle Charger (Or Similar)
  • Available Electrical Outlets

034Motorsport End User Flashing Kit Contents:

  • 034Motorsport OBD-II Adapter
  • USB-A to USB-B Cable
  • Carrying Case
  • User Credentials (Provided Via Email)

EMISSIONS DISCLAIMER

  • This product is sold for racing use as well as use on vehicles not registered for on highway use.
  • By purchasing this product, you understand that this product is sold for racing use as well as used on vehicles not registered for on highway use, and that it is not legal for use on highway or street vehicles.

También te puede interesar

Suscríbete a nuestra lista de correo electrónico para recibir noticias y Ofertas primero.